Many thanks for your purchase!

The product/s will be shipped on the day confirmed in the email and we hope it is already with you :)

Below are the guidelines for fitting your wrap:

Fitting instructions :

  1. Clean your key with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the key.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the key.
  5. The heat will make the hard foil flexible and it will apply to your key easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!
We love seeing your keys wearing our wraps :)

P.S. WE'RE ALSO SELLING AUDI AIRBAG WRAPS! CHECK THEM OUT ;)

Our website has the best prices and availability - why not check the airbags out?

1. Rectangular (pre 2010 models):   www.superwrappz.co.uk/rectangular-airbag-wrap

2. Round (after 2010, check photos and compare!):    www.superwrappz.co.uk/round-airbag-wrap

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!

Fitting instructions :

  1. Clean your key with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the key.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the key.
  5. The heat will make the hard foil flexible and it will apply to your key easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!

We love seeing your keys wearing our wraps :)

P.S. WE'RE ALSO SELLING AUDI KEY WRAPS! CHECK THEM OUT ;)

Our website has the best prices and availability - why not check the keys out?

1. Flip Key 1st Gen (- to 2004 models):   http://www.superwrappz.co.uk/flip-key-1st-gen---to-04-7-c.asp

2. Flip Key 2nd Gen (after 2004, check photos and compare!)
Some Advanced keys now look like this!:    http://www.superwrappz.co.uk/flip-key-2nd-gen-04-to-now-5-c.asp

3. Advanced Smart Key - Keyless entry and ignition key :   http://www.superwrappz.co.uk/advanced-smart-key-3-c.asp

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!

Fitting instructions :

  1. Clean your key with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the key.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the key.
  5. The heat will make the hard foil flexible and it will apply to your key easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

Please see installation video here: https://youtu.be/Viui8ugQzEo

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!
We love seeing your keys wearing our wraps :)

P.S. WE'RE ALSO SELLING AUDI AIRBAG WRAPS! CHECK THEM OUT ;)

Our website has the best prices and availability - why not check the airbags out?

1. Rectangular (pre 2010 models):   www.superwrappz.co.uk/rectangular-airbag-wrap

2. Round (after 2010, check photos and compare!):    www.superwrappz.co.uk/round-airbag-wrap

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!

Fitting instructions :

  1. Clean your key with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the key.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the key.
  5. The heat will make the hard foil flexible and it will apply to your key easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!
We love seeing your keys wearing our wraps :)

P.S. WE'RE ALSO SELLING BMW BADGE EMBLEM WRAPS! CHECK THEM OUT ;)

Our website has the best prices and availability - why not check the emblems out?

BMW BADGE EMBLEM WRAPS - FIT ALL BMW's:   http://www.superwrappz.co.uk/bmw-badge-emblem-corners-6-c.asp

PLEASE CHECK SIZING PICTURE - WE CAN MAKE CUSTOM SIZES JUST GET IN TOUCH :)

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!

Fitting instructions :

  1. Clean your badge with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the badge.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the badge.
  5. The heat will make the hard foil flexible and it will apply to your badge easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24-48hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!
We love seeing your keys wearing our wraps :)
As this is an exterior product, please make sure you don't use jet washers too close to the badge and leave plenty of time for the glue to set.

P.S. WE'RE ALSO SELLING BMW KEY WRAPS! CHECK THEM OUT ;)

Our website has the best prices and availability - why not check the keys out?

1. Rectangular (pre 2010 models):   http://www.superwrappz.co.uk/bmw-rectangular-shape-4-c.asp

2. Trapezoid (after 2010, check photos and compare!):   http://www.superwrappz.co.uk/bmw-trapezoid-shape-24-c.asp

3. Diamond (after 2015, check photos and compare!
COMING SOON

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!

Fitting instructions :

  1. Clean your key with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the key.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the key.
  5. The heat will make the hard foil flexible and it will apply to your key easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!
We love seeing your keys wearing our wraps :)
Our website has the best prices and availability - why not shop around for the other automotive wraps we're doing??
We cover AUDI, BMW, FORD, VAUXHALL, VOLKSWAGEN, SKODA and SEAT!

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!

Fitting instructions :

  1. Clean your key with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the key.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the key.
  5. The heat will make the hard foil flexible and it will apply to your key easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!
We love seeing your keys wearing our wraps :)
Our website has the best prices and availability - why not shop around for the other automotive wraps we're doing??
We cover AUDI, BMW, FORD, VAUXHALL, VOLKSWAGEN, SKODA and SEAT!

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!

Fitting instructions :

  1. Clean your key with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the key.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the key.
  5. The heat will make the hard foil flexible and it will apply to your key easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!
We love seeing your keys wearing our wraps :)
Our website has the best prices and availability - why not shop around for the other automotive wraps we're doing??
We cover AUDI, BMW, FORD, VAUXHALL, VOLKSWAGEN, SKODA and SEAT!

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!

Fitting instructions :

  1. Clean your key with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the key.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the key.
  5. The heat will make the hard foil flexible and it will apply to your key easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!
We love seeing your keys wearing our wraps :)
Our website has the best prices and availability - why not shop around for the other automotive wraps we're doing??
We cover AUDI, BMW, FORD, VAUXHALL, VOLKSWAGEN, SKODA and SEAT!

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!

Fitting instructions :

  1. Clean your key with an alcoholic solution.
  2. Remove the wrap from the paper and apply a small bit on the key.
  3. Keep the wrap upright and heat the foil with a hair dryer.*
  4. *Don't worry this won't damage the key.
  5. The heat will make the hard foil flexible and it will apply to your key easily.
  6. Use your fingers to press the warm foil and its edges.
  7. The glue will reach its full adhesive power after 24hrs – make sure you keep applying pressure.
  8. If the wrap has any wrinkles/knurled pattern or has been bent by RM, apply heat with a hair dryer and press the wrap as these will disappear.

If you have any questions, don't hesitate to write us!

Please leave feedback for the purchase, tell your friends about us & send pics!
We love seeing your keys wearing our wraps :)
Our website has the best prices and availability - why not shop around for the other automotive wraps we're doing??
We cover AUDI, BMW, FORD, VAUXHALL, VOLKSWAGEN, SKODA and SEAT!

All our products can be customised to any colour you want so check our other colours by browsing through our products or use the Search function on top!