• Dark Smoke BMW badge tint, 2-piece, fitted — SuperWrappz hero. Compatible with BMW — Not Genuine BMW Parts.
  • Dark Smoke BMW badge tint (2-piece) — SuperWrappz hero
  • Dark smoke 2-piece BMW badge tint overlay by SuperWrappz on E/F Series emblems, aftermarket vinyl
  • Two stacked photographs of the same BMW bonnet roundel. The upper one, labelled Before, is the standard blue-and-white badge. The lower one, labelled After, is the same badge with the smoke tint overlay fitted, darkening the blue and white sections.
  • SuperWrappz V1 tint sizing chart (2-piece) — measure the full badge diameter in mm, without the outer silver ring. Hood: 77mm. Trunk: 70mm. If your diameters match, it fits. If not, we cut custom sizes — send your diameter measurements via the Contact page before ordering. Compatible with BMW — Not Genuine BMW Parts.
  • Dark Smoke 2-Piece BMW badge tint overlay on the front hood badge, close-up
  • Dark Smoke 2-Piece BMW badge tint overlay on the front hood badge, close-up
  • Dark Smoke 2-Piece BMW badge tint overlay on the front hood badge, close-up
  • Dark Smoke 2-Piece BMW badge tint overlay on the front hood badge, close-up
  • Dark Smoke 2-Piece BMW badge tint overlay on the front hood badge, close-up
  • Dark Smoke 2-Piece BMW badge tint overlay on the front hood badge, close-up
  • Dark Smoke 2-Piece BMW badge tint overlay on the front hood badge, close-up
  • Dark Smoke 2-Piece BMW badge tint overlay on the front hood badge, close-up
1 13

SuperWrappz

BMW Badge Tint Overlay — V1 Compatible

BMW Badge Tint Overlay — V1 Compatible

£12.95 GBP
£12.95 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
Finish
Coverage

Compatible with BMW — Not Genuine BMW Parts

Dark Smoke BMW badge tint overlay — 2-piece overlay set, V1 compatible — fits E and F Series chassis, the chassis code decides, never the year. Precision pre-cut dark-smoke tinted film covering the full face of each BMW roundel for a fresh, uniform look. Covers your front and rear badges (1 pair).

  • UK-made kits, precision-cut in Birmingham from premium cast vinyl. Not a plastic replacement badge.
  • Printed fitting instructions in the envelope, video walkthrough on the site
  • Removable overlay — it sits on top of your badge, not in place of it
  • Sits over a faded, cracked or de-laminating roundel without replacing it
  • Choose from Black Gloss, Dark Smoke or Light Smoke
  • Compatible with BMW · Aftermarket · Not Genuine BMW Parts

Please check the sizing image against your badges before ordering — custom sizes available, just message us your badge diameters.

View full details

Home / Shop / TINT / BMW Badge Tint Overlay — V1 Compatible

TINT

Not a colour. A decision.

Watch the light lose i

Committed to tint? Correct. The full set:

V1 BadgesV2 BadgesV-BracesLATCH Key Wraps

The spec sheet

VinylPremium cast, air-release channels
InstallAt home — guidance included
FitmentCut per chassis, not trimmed by you

Carbon that earns the word. i

By day it reads factory. Under lights it reads expensive. Your neighbour's bargain wrap reads regret.

Cast vinyl doesn't do drama.

It goes on once and shuts up. No maintenance schedule, no aftercare ritual.

One layer. That's the whole trick. i

Thinner than the excuse you gave for the kerbed wheel.

Our no-thrills promise.

Cut for your chassis code, not "universal". If it doesn't line up, that's our problem.

Your thumb will find it.

Carbon: a weave your thumb keeps returning to.

Goes on at home. Comes off when you say so. i

Goes on. Comes off. Designed to leave nothing behind — unlike your last modification.

Us vs the alternatives

 SuperWrappzAuction vinylDealer optionAerosol dip
Cut per chassisYesNoNoNo
Clean removalBy designRarelyNoNo
Under-light finishExpensiveRegretFlatPatchy
InstallAt homeHoursHoursA weekend
Garage backingYesNoPartialNo
Non-standard badge sizes£8 custom re-cut add-onYour problemDealer ratesRespray
Smugness index10,5654001,20012

Compatible with BMW — Not Genuine BMW Parts.