Seven Round Badges, Not One

The bonnet badge is one of seven

Most people arrive at this page having already done the bonnet. They are stood on the drive in light drizzle, quietly pleased with themselves, and then they notice the boot badge. Then the wheel centres. Then the steering wheel, which is the badge nobody photographs and everybody looks at for the entire journey.

A standard BMW carries seven round badges: bonnet, boot, four wheel centres and the steering wheel. A full SuperWrappz kit is cut for all of them. Compatible with BMW — Not Genuine BMW Parts.

"It is not just the bonnet — what else can be done, and what do I order?"

What you want to change What that actually is What to order From
Two quadrants coloured, two left standard The classic half-and-half roundel Half Black Gloss V1, Half Black Carbon V1, Half Black Gloss V2 £9.98
All four quadrants, every badge on the car Full kit — quadrant pieces for bonnet, boot, steering wheel and wheel centres Full Black Gloss V1, Full Black Carbon V1, Full Black Gloss V2 £17.00
The whole badge face covered flat, no quadrants Tint overlay — one piece per badge, over the full face Black Gloss Tint 2-Piece, Dark Smoke Tint 9-Piece £12.95
The V-braces behind the kidney grilles SPINE — two reflective strips, 30cm x 7cm Red Reflective V-Brace, Blue, White £17.00
The key fob in your pocket LATCH — cut per fob generation, E, F or G SuperWrappz Key Wrap £12.95
Stripes down the flank or the roof TRACER — reflective pin stripes, 0.5cm or 1cm White 0.5cm, Red 1cm £19.97
Badge overlay plus a tint in one delivery Identity Kit — both overlays, one order SuperWrappz Identity Kit £24.95
The two round badges on an S1000R Motorcycle geometry, four quadrants per badge Black & Red Carbon S1000R £15.28

The sizes — and why yours is a radius, not a diameter

This is the part that goes wrong most often, so read it once properly. A SuperWrappz badge overlay is cut to the quadrant. You measure from the centre of the badge outward to the edge of the coloured field, and you stop before the silver divider lines. Do not include the dividers. Do not measure across the badge.

Every size in the two tables below is a quadrant measurement.

V1 quadrant sizes — E and F series

Position Quadrant size Note
Bonnet 23mm The common one
Bonnet, size 2 20mm Some chassis run smaller
Boot 23mm The common one
Boot, size 2 18mm Some chassis run smaller
Wheel centres 19mm Four of them, and they are all the same
Steering wheel 11–12mm The smallest piece in the envelope

V2 quadrant sizes — G and U series, plus the F40

Position Quadrant size Note
Bonnet 22.5mm Different badge face, different curvature
Boot 20.5mm Not the same as the bonnet
Wheel centres 16mm Noticeably smaller than V1
Steering wheel 12mm No room for approximation

Context only, never the number you order by: 82mm and 74mm are the outer roundel diameters of the bonnet and boot badges. Useful for identifying a badge across a car park, useless for choosing a kit. If a seller has quoted you 82mm and nothing else, they have sold you a circle and hoped.

V1 or V2 — the chassis code decides, not the year

V1 is cut for E and F series. V2 is cut for G and U series, plus the F40. That is the whole rule, and it is a chassis rule. Seventeen V1 chassis were still being built well past 2017, and two V2 chassis were on the road before it.

Car Chassis Built Takes
X2 F39 Including 2023 cars V1
5 Series G30 From 2016 V2
7 Series G11 From 2015 V2
1 Series F40 2019 onward V2
3 Series E90 or F30 Any year V1

Find yours on the BMW badge overlay fitment guide, which lists the chassis codes against the quadrant sizes. Where the year on the V5C says one thing and the chassis code says another, the chassis code wins.

Quadrant kit or tint — two different jobs

A quadrant kit changes the colour of the roundel. A tint covers the badge face in one piece, which is what people want when the roundel underneath is faded, marked or de-laminating and they would rather it went quiet than colourful.

The 9-piece tint set covers front, rear, all four wheel centres and the steering wheel — seven pieces, plus two spares. The 2-piece is front and rear only. Three finishes: Light Smoke, Dark Smoke, and gloss black. Tints are cut V1-compatible for E and F series roundels, and you check them against the sizing image on the listing rather than a quadrant figure.

Sixty-plus colours, and the ones people actually pick

Across 107 published products there are more than 60 colours and finishes. In practice most orders land in one of four groups.

To see the lot against your own paint, the colour finder is built for exactly that. The V2 range sits in G-SPEC, the V1 range in YOUNGTIMER.

If your measurement does not match the chart

It happens. Badges get replaced, cars get imported, someone has been in there before you with a heat gun and opinions. Send your quadrant measurements through the support page and we cut custom sizes, or add the custom re-cut add-on to your order. Every kit is cut to order in Birmingham from premium 3M cast vinyl, so a non-standard size is a different cut file, not a different factory.

Fitting, removal and delivery

Printed instructions go in the envelope, the full walkthrough lives on the badge overlay installation page, and the general method is on fitting instructions. Clean the badge with an IPA wipe, dry-fit before you peel, press from the centre outward. The overlay sits on top of the original badge rather than replacing it, and it is designed to be removed cleanly.

UK Royal Mail 1st Class delivery is free, with no minimum spend. 2nd Signed is £0.88, 1st Signed £1.70, Next Day by 1pm £9.88, Next Day by 10am £11.88, and International Tracked & Signed is £10.88. Dispatch is 1–3 working days, because everything is cut to order. Full detail on the shipping page.

Where to start

53,000+ sold, 10,565 eBay feedbacks, 4.3 stars across 568 Amazon ratings, trading since 17 May 2011. None of that measures your steering wheel for you, so take one quadrant measurement first, then pick.

Discount code LAUNCH8 takes 8% off, first 280 orders, no end date.

Compatible with BMW — Not Genuine BMW Parts. BMW is a registered trademark of BMW AG, referenced here to indicate compatibility only.