Measured off the housing of your chassis, not a photo of someone else's.
Compatible with BMW — Not Genuine BMW Parts
SuperWrappz are precision-cut vinyl overlays. Badges are not included.
Black & White Gloss V1 BMW Badge Overlay — Compatible with E/F Series
Fits: classic → modern BMW (E-series through F-series) — PATINA & YOUNGTIMER, V1: e8x, f20, f22, f45, e46, e9x, f30, f32, e39, e60, f10, e63, f06, e38, e65, f01, x1-e84, x1-f48, x2-f39, x3-e83, x3-f25, x4-f26, x5-e70, x5-f15, x6-e71, x6-f16, z3, z4-e85, z4-e89, m2-f87, m3-e46, m3-e9x, m3-f80, m4-f8x, m5-e39, m5-e60, m5-f10, m6-e6x, m6-f0x
Compatible with BMW — Not Genuine BMW Parts.
- The one that looks like it belongs on the car — cut to the quadrant so the edges disappear into the roundel.
- High-build automotive-grade gloss with a deep, paint-like finish.
- Black and white split — contrast BMW never offered from the factory.
We pay for the good vinyl so you never find out what the cheap stuff does after one British winter. Premium, automotive-grade cast vinyl. Proper air channels in the adhesive backing, so it beds down flat, first time.
Finishes that hold their edge, cut per chassis in a UK garage — SuperWrapp'ing your car since 2011, built because we cared about the badge, not because badges were trending. Compatible with BMW. Not genuine BMW parts.
SuperWrappz vs. everyone else
| Attribute | SuperWrappz | Generic aftermarket |
|---|---|---|
| Precision-cut for YOUR badge | CNC-cut per exact model, not a generic sheet. | “Universal fit” (fits nothing) from mystery vinyl, dealer, or DIY alike. |
| Install | At home, everything in the box. | A tube of mystery glue, a booked service slot, or a lost weekend — pick your poison. |
| Finish options | 30+ — gloss, matte, carbon, chrome. | One colour if you’re lucky, whatever’s left in the can if you’re not. |
| Adhesive | Air-release cast vinyl with an adhesive channel system. | Whatever came on the back of the sheet. |
| Reversible | Designed for clean removal. | Residue is the souvenir. Crowbar sold separately. |
| UK stock | Cut and posted from Birmingham. | “Dispatched from warehouse” (read: not the UK), 2–6 week back-order, or a Saturday trip to a DIY shop that’s already shut. |
| Actually designed for badges | Badges are what we’re built on. | Designed for nothing in particular, or for wheels, or to be replaced. |
| Goes on the badge, not the paint | Correct. | Sprayed, dipped, or stuck to the panel. |
The detail only BMW people notice. SuperWrappz Black & White Gloss badge overlay — the signature two-tone contrast finish for E-series and F-series BMW. Half black, half white. Clean, bold, unmistakable.
What's in the kit:
- Quadrant pieces, not one round sticker — four quarter-cuts per badge, sized to the coloured quarters of your roundel: bonnet, boot, steering wheel and wheel centres
- Split-colour coverage: two quadrants in gloss black, two in gloss white
- Automotive-grade cast vinyl — self-adhesive, and an overlay rather than a replacement badge
- Sizing is by the quadrant: measure one quarter from the badge centre out to the edge of the colour, without the silver divider lines, and match it to the sizing chart in the photos — V1 is 23mm hood and trunk, 20mm hood size 2, 18mm trunk size 2, 19mm wheels, 11–12mm steering wheel. If your quadrants match, it fits. If not, send your quadrant measurements via the Contact page and we cut custom sizes.
Fitment:
V1 fits BMW E-series and F-series: E46, E90, E92, F20, F30, F31, F10, F11, X3, X5, M3 (F80), M4 (F82) and the rest of the E and F range. Your chassis code decides it, not the year — plenty of F-series cars were built well after 2017 and they all still take V1. Match your quadrant to the chart above and you are right.
G or U series, or an F40? Order the V2 version.
Why Black & White?
The black/white contrast overlay is the most recognised SuperWrappz look. It works on dark BMWs (gloss black pops against dark paint), white BMWs (white mirrors the paint, black creates depth), and M Sport builds (matches the factory black/white aesthetic on M wheels and trim). SuperWrappz delivers that look at home.
Installation:
Clean badge with IPA wipe, dry-fit, peel and press from centre outward. Full guide at superwrappz.co.uk/pages/bmw-badge-overlay-installation
Not genuine BMW parts. Designed, cut, and fulfilled in Birmingham, UK.
BMW® is a registered trademark of BMW AG, referenced to indicate compatibility only.
More from the range
THE PART OTHER KITS SKIP
Cut properly or not at all.
Automotive-grade 3M cast vinyl, cut in Birmingham on the bench that cuts every kit.
Air-channel adhesive backing — goes on once, designed to come off clean when you say so.
Everything's in the box. The longest step is deciding which badge to do first.
Designed for clean removal — no scraper, no awkward conversation at lease return.
Something wrong? You talk to the people who actually cut the file, not a ticket queue. Your statutory rights are unaffected.
10,243 eBay feedbacks. SuperWrapp'ing your car since 2011.
Verbatim, typos included. Source: our original eBay profile — superwrappz-co-uk.
“Brilliant. ordered Friday deliverd Saturday. A Quality product as well as easy to follow instructions and a follow up email with loads of help. what's not to like. great seller. will be back. thank you.”
Verified purchase · eBay“Really fast delivery, I am really impressed! For anyone debating if to purchase the badge stickers, do it! You can't even tell they are so perfectly cut/made! Thank you so much!”
Verified purchase · eBay“Third time purchasing…had these wraps on my three previous cars.Good quality, fast delivery!”
Verified purchase · eBay“Great product, sent 1st class signed for! Great comms & will definately be using this company for any other decals I buy! cheers!”
Verified purchase · eBay“Love these decals makes my bike look awesome and with very fast delivery great eBay seller”
Verified purchase · eBay
10,243 feedbacks · 53,000+ sold · SuperWrapp'ing your car since 2011
